Valves Suppliers

Cast Iron Diaphragm Valves Body Rubber Lined in Natural/Neoprene/Butyl rubber fitted With rubber / Teflon diaphragm. Hand wheel operated. Flanged ends duly dril

Our company name is outong international Co., ltd. We supply the valves and valves' parts. The valves is manual , pneumatic and ectric actuator. And s

Two series are available: 1) HX-AP; 2) HX-CP. 1) The HX-AP VACUUM BREAKER VALVE is mounted on top of a section of containers or pipes, functioning to break

BSP Thread Male x Female Chrome Plated Brass Mini Ball Valve for Water Chrome-plated brass body - for extra strength and corrosion resistance, the working press

This series of solenoid valve is 2-Way 2-Position normally closed solenoid valve. This 2-way solenoid valve has 2 pipe connections, that is, an inlet and an out

API, BS, MSS, ANSI, ASME, ASTM, DIN150 lbs up to 2500 lbs ½” up to 48” Bolted bonnet. Floating and trunnion-mounted ball. Full and reduced bo

Uses and structure:       L type three way ball valw are used to switch directions of medium flow and can have two intervert

GATE VALVES THREADED BRASS AND BRONZE MATERIAL: LEAD AND NO LEAD               &nbs

The SAFCO SCON (P) Ltd corporate philosophy is to bring to the market new and innovative valve designs with special emphasis on quality, safety, and ease of ope

B3 trunnion mounted ball valve is widely used in oil, nature gas pipeline and the industries of liquefied gas, coal gas, etc. as an open/close control element.

All kinds of marine valves, such as, Ball valve, Butterfly valve, Gate valve, Check valve, Safety valve etc. Standard: ASME/DIN/JIS/GB Material: Cast iron, Carb

1. SIZE: 2"~56" (DN50~DN1400) 2. PRESSURE: 150lB/ 300lb (PN10/16) 3. MATERIAL: CAST IRON, CARBON STEEL, STAINLESS STEEL, ALLOY, ETC. (AS BUYER REQUE

Product Description 1, used to reduce the force needed to depress the clutch pedal. 2, The structural operation of the clutch booster is basically the same

OADHU provides wide range of ball valves in all class (class 150 to 3000) Products  We provide variety of valves in all sizes and standards such as

TECHNICAL SPECIFICATION    "MOD" SERIES ELECTRICAL ACTUATOR TECHNICAL SPECIFICATION Manufacturer   &Ac

Explanation It is the installment equipment which directs to the fluid under favour of ball and shaft. Dimensions DIN 3202.F1 (TS 3148) / DN 15 - DN 100 DIN 32

Gate valves    1.Compact structure and reasonable design. The Valve has fine stiffness, with small flow resistance.  2.Adop

Non Standard Port F/F (Nickel Plated) sizes: 1/4" to 4" ; 1/4" to 2 1/2"; 1/2" to 1"; 1/4" to 1&a

Specifications 1.Halliburton type, all could change with Halliburton parts. 2.All equipments are produced according to API standard.